Maxpure Logo

High Quality Stainless Steel BioPharm Fittings

Hose AdapterCap CLAMP FITTINGS: Caps & Clamps

Please use the table below to select the fitting you require. Further information on MaxPure fittings can be found below.

 

Ordering Information

FITTINGS SELECTION TABLE
Image Description Part Number Price
Clamp Group

1/2" - 3/4" Mini-TC Clamp, 304ss

13MHHM.75

$7.50

1" - 1.5" TC Clamp, 304ss

13MHHM1.5

$8.33

2" TC Clamp, 304ss

13MHHM2.0

$9.58
Clamp Group Image

1/2" - 3/4" Mini-TC Cap, 316ss

TEG16A6L.75PM

$13.83

1" - 1.5" TC Cap, 316ss

TEG16A6L1.5PM

$14.07

2" TC Cap, 316ss

TEG16A6L2.0PM

$17.50
Mini Gasket

3/4" Mini-Gaskets - EPDM

EG40E-.75

$47.50/box
(25/box)
1.5" Sanitary Gasket

1.5" Sanitary Gaskets - EPDM

EG40E-1.5

$37.50/box
(25/box)
  • Cleaning:
    A seven step cleaning cycle is conducted to ensure that components are free of contaminants such as stains, oil, loose particles etc. At a final stage the fittings are double-rinsed using hot DI water.
  • Inspection Procedures:
    All fittings produced by EGMO production are 100% visually inspected for any surface finish imperfections, as mentioned in Table SF-3 in the ASME BPE specification. All dimensional characteristics are inspected 100% for tolerances listed in Table DT-5 in the ASME BPE specification.
  • Marking:
    Each BPE fitting is marked with the following:
    • Heat number
    • Job number
    • Material grade
    • Standard Surface Finish (SSF), as specified in ASME BPE, Part DT.
    • Brand Name
  • Packaging:
    Each fitting is capped, bagged and labeled in full compliance with the ASME BPE standard.
  • Documentation:
    Full Material Test Reports are supplied with the finished products and via an interactive internet website, using a special private code.

[about paw]

[contact]

[privacy]

[terms & conditions]

Copyright 2008, PAW Bioscience Products, INC.
732-460-0088, 732-460-0802 fax

 

Wrapper