Maxpure Logo

High Quality Stainless Steel BioPharm Fittings

Tee FittingCLAMP FITTINGS: Tee's

Please use the table below to select the fitting you require. Further information on MaxPure fittings can be found below.

 

Ordering Information

FITTINGS SELECTION TABLE
Image Description Part Number A B Price
1/2" Tee

1/2" Tee

TEG76L.5-PM

2.25

4.5

$71.40
3/4" Tee

3/4" Tee

TEG76L.75-PM

2.375

4.75

$71.40

1.5" Tee

1.5" Tee

TEG76L1.5-PM

2.875

5.75

$65.98

2" Tee

2" Tee

TEG76L2.0-PM

3.375

6.75

$74.60
  • Cleaning:
    A seven step cleaning cycle is conducted to ensure that components are free of contaminants such as stains, oil, loose particles etc. At a final stage the fittings are double-rinsed using hot DI water.
  • Inspection Procedures:
    All fittings produced by EGMO production are 100% visually inspected for any surface finish imperfections, as mentioned in Table SF-3 in the ASME BPE specification. All dimensional characteristics are inspected 100% for tolerances listed in Table DT-5 in the ASME BPE specification.
  • Marking:
    Each BPE fitting is marked with the following:
    • Heat number
    • Job number
    • Material grade
    • Standard Surface Finish (SSF), as specified in ASME BPE, Part DT.
    • Brand Name
  • Packaging:
    Each fitting is capped, bagged and labeled in full compliance with the ASME BPE standard.
  • Documentation:
    Full Material Test Reports are supplied with the finished products and via an interactive internet website, using a special private code.

 

[about paw]

[contact]

[privacy]

[terms & conditions]

Copyright 2008, PAW Bioscience Products, INC.
732-460-0088, 732-460-0802 fax

 

Wrapper